Nitrogen Generator -->PSA Systems--> Nitrosource Compact Nitrogen Generator
Parker domnick hunter Nitrogen Generator produces nitrogen gas from compressed air. Nitrogen gas is used to provide a clean, dry and inert atmosphere in environments and processes where oxygen is not desired.
AFFORDABLE COST AND ENERGY SAVING
The payback period of the Domnick Hunter nitrogen generator, which is a cost-effective solution, is short. Additionally, on-site nitrogen gas production with a generator; It also eliminates additional burdens such as refilling, order transactions, tank rent, shipping fees and future price increases by the nitrogen supplier brought about by external nitrogen gas supply. While the nitrogen generator can be fed from a standard air source, it provides the required amount of nitrogen gas and is economical. Thanks to the mode; It is possible to control nitrogen production, flow rate and purity values. The nitrogen gas produced is not wasted as in traditional sources and evaporation losses occurring in the use of liquid nitrogen are eliminated; In this way, extra savings are achieved. Thanks to its ability to operate uninterruptedly 24 hours a day, 7 days a week, there are no downtimes or production losses due to nitrogen gas depletion.
PRACTICAL AND SAFE ALTERNATIVE
The system can be easily installed in the compressor room or production area with standard piping, without the need for any special equipment. In addition, since the maintenance time is very short, there are no downtimes caused by gas outages. In the nitrogen production system, nitrogen gas is produced at low pressure; Thus, the dangers arising from storing the gas in high-pressure cylinders are prevented. In addition, the disassembly, assembly and transportation labor of the cylinders is eliminated.
FLEXIBLE MULTI-BANK OPTION
Nitrosource Compact Nitrogen Generators Multi-Modular System; Parker domnick hunter nitrogen generator is more flexible than double-tank PSA generators thanks to its modular concept. Increasing nitrogen needs can be easily met by adding a module to the system. With the added modules, the system can be backed up, so there is no gas outage during maintenance. Parker domnick hunter nitrogen generator can easily pass through even standard door entrances thanks to its compact design.
FEATURES
-
It can be operated using the existing compressed air source in the facilities.
-
It reduces the oxygen content to the required values between 10 ppm and 5%.
-
Automatic economy mode is available.
-
It has a built-in oxygen analyzer to constantly monitor purity.
-
It has digital and analog outputs for remote monitoring and control.
-
It has an alarm feature.
-
It has an easy-to-use control panel.
-
It has a compact design.
FEATURES
- Up to 90% Cost Savings*: The amortization period of the investment is approximately 12-24 months.
- Energy Saving: Low air consumption provides significant energy savings.
- Convenient and Reliable: It is simple to install, easy to use, and maintenance costs are low. It eliminates the safety risks caused by other gas sources.
- Design that takes up little space: Thanks to its compact design, it takes up less space in the facility.
- Easy Capacity Increase: The special modular design provides the ability to easily meet increasing nitrogen needs by adding an extra column.
- Low Carbon Emission: It prevents environmental and air pollution caused by transportation vehicles in the supply of liquid and tube nitrogen.
*It is the value calculated by comparison with the cylinder or liquid nitrogen supply..
HOW DOES IT WORK
-The chambers, which work on the PSA principle, are filled with CMS (Carbon Molecular Sieve) granules, which is a special adsorption material.
-Compressed air passes through chemical (desiccant) type dryer and filters; It is cleared of particles, oil and moisture.
-The resulting clean and dry air enters from under the active adsorption bed of the nitrogen generator and moves upwards.
-While oxygen (O2), carbon dioxide (CO2) and small amounts of transition gases in the air are held by the CMSs in the active bed, nitrogen molecules are allowed to pass.
-When the CMS in the activated chamber is about to reach saturation with the captured gases, the system automatically switches between beds depending on the preset time.
-The bed that has completed its regeneration begins to operate, while the bed that has reached saturation begins regeneration.
-System; It produces nitrogen gas uninterruptedly by working alternately between 2 beds automatically and regularly.
-The nitrogen gas produced is constantly analyzed and monitored with an oxygen analyzer to see whether it has the desired purity.